Viper SL1610SE Uživatelský manuál stáhnout pdf (Strana 5)

5

SLIDER EXTRACTOR SETUP

!!! Read operators manual thoroughly

prior to operating or servicing this

machine!!!

Carefully check the shipping carton for

signs of damage. Report any carton

damage to carrier immediately.

Check carton contents to ensure carton is

complete. Contact your Viper distributor if

anything is missing.

Contents:

• Carpet Extractor

• Short “bleeder” vacuum hose

• 50’ extension power cable

!!! Read operators manual

thoroughly prior to operating or

servicing this machine!!!

1) Using a hose or bucket, fill tank with a

maximum of 10 gallons of hot water.

2) Add distributor recommended cleaning

solution

!!! Do not use flammable liquids or

operate machine in or near

flammable liquids or vapors!!!

3) Connect the supplied extension power

cable to the machine. Plug cord into a

grounded wall outlet. (see grounding

instructions)

4) Drop the brush head to the floor with

the foot release pedal on the back of

the machine.

MACHINE OPERATION

PRIOR TO EXTRACTING CARPETS

1) Inspect power cable and extension

cable for damage. Replace cable if

damage is found.

2) Vacuum carpet to remove debris prior

to extracting carpet.

CARPET EXTRACTING

1) Turn on vacuum / pump switch.

NOTE: Solution will only spray when

the brush / spray button is pushed.

2) To start cleaning, push the brush /

spray button and begin to pull the

machine backwards.

NOTE: For best cleaning results, pull

back on the machine at a pace of

approx. 10 feet in 15 seconds.

3) Release brush / spray button at the end

of the path, and continue to pull

machine back for another 12 inches to

pick up excess solution.

4) Tip machine back onto the transport

wheels and push forward to begin next

path.

OPERATING HINTS

1) Overlap cleaning path by approx. 2

inches

2) Work away from power outlet and

power cable in order to avoid damage

to the power cable.

1 2 3 4 5 6 7 8 9 10 ... 16 17

Komentáře k této Příručce

Žádné komentáře