Viper SL1610SE Uživatelský manuál stáhnout pdf (Strana 7)

7

4) Remove and inspect brass spray jets. If

necessary, clean jets in acetic acid

solution.

NOTE: Do not clean brass jets with a

pointed object, as it will damage the jets.

5) Check brush assembly & remove any

debris or carpet fibers.

6) Check pick up head and remove any

debris or carpet fibers.

7) Check condition of the stainless steel

pickup shoes on the pickup head. The

shoes must contact the floor for the

whole length of the pickup head.

Replace as necessary.

8) Clean machine with a nonabrasive

cleaner.

9) Inspect power cable for any damage.

Replace if necessary.

MONTHLY MAINTENANCE

1) Flush pump & plumbing with an acetic

acid solution to dissolve any chemical

buildup.

Mixing Instructions:

a) Premix 16 oz. or an acetic acid

solution with 2 gallons of water and

pour into solution tank.

b) Turn vacuum / pump switch on

c) Put machine head over floor

drain and operate machine for 50

seconds.

d) Shut machine down and allow

remaining solution to sit in

machine overnight.

e) The following day, spray out

remaining solution and flush

system again with 3 gallons of

clean water.

2) Inspect machine for water leaks.

3) Lubricate wheels with a water resistance

lubricant.

4) Check machine for loose or missing

nuts, screw and bolts and replace as

necessary.

MACHINE STORAGE

1) Prior to storing the machine, ensure the

solution and recovery tanks are clean

and empty of any solution.

2) Store machine in upright position in a

dry area, with the brush head off the

floor.

3) Remove recovery tank clear lid to

allow for air circulation.

NOTE: If you are storing the machine in

an area which can freeze, be sure both

tanks and the solution plumbing are empty

of all water and dry!

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Komentáře k této Příručce

Žádné komentáře